Skip to Content

EDU Mini DIY – Warranty & Product Terms

QADIR Store | Product-Specific Terms and Conditions

Operated by Qadir Corporation (卡德爾股份有限公司)

Website: www.dec.com.tw

Version: 1.0

1. General Provisions

1.1 Purpose and Scope

EDU Mini DIY is an educational quadruped robotics kit designed for hands-on assembly, robotics learning, programming, and experimental development.

These terms explain the product's assembly requirements, operating conditions, firmware development, warranty coverage, replacement parts, repair services, and technical support.

These product-specific terms supplement the QADIR Store Shopping, Returns & Warranty Policy. Customers should review both documents before purchasing.

Where these terms and the general policy address the same matter, the more specific provision will apply to the extent permitted by applicable law. Statutory consumer rights remain protected.

1.2 Educational Product Positioning

EDU Mini DIY is intended primarily for education, research, and personal robotics development.

It is not designed or certified for safety-critical operations, emergency response, industrial production, or other applications where a malfunction could create significant risks to people or property.

Customers are responsible for assessing the suitability of the product for their intended applications.

2. Product Configuration and DIY Assembly

2.1 DIY Kit Configuration

EDU Mini DIY is supplied as a self-assembly robotics kit.

Customers are responsible for assembling the product according to the instructions and documentation provided by Qadir Corporation.

The package contents, hardware specifications, included accessories, and software resources are determined by the product description and order confirmation applicable at the time of purchase.

2.2 Assembly Requirements

Customers should carefully follow the provided assembly instructions, including component positioning, fastener installation, servo alignment, wiring, connector orientation, and battery installation.

Before powering on the robot, customers should verify that all mechanical and electrical connections have been completed correctly.

Qadir Corporation recommends adult supervision when the product is assembled or operated by younger students.

2.3 Assembly-Related Damage

Damage or malfunction directly resulting from incorrect assembly, improper wiring, excessive tightening, incorrect servo positioning, electrical short circuits, or other assembly errors is not covered by complimentary warranty repair.

However, defects attributable to manufacturing, supplied components, or original product quality remain subject to the applicable warranty and statutory remedies.

The fact that a customer has assembled the kit does not, by itself, invalidate warranty coverage.

3. Programming and Firmware Development

3.1 Programming and Educational Development

EDU Mini DIY supports educational programming and experimental robotics development within the capabilities of its hardware and supported software environment.

Customers may develop their own control programs, modify operating parameters, and conduct programming experiments for educational or personal development purposes.

Compatibility with third-party software, custom programs, or development tools is not guaranteed unless expressly stated in the product documentation.

3.2 Firmware Reflashing and Modification

Customers are permitted to reflash, replace, or modify the robot's firmware at their own discretion.

However, Qadir Corporation's complimentary warranty does not cover software recovery, reprogramming, configuration restoration, or hardware damage directly resulting from customer-installed or modified firmware.

Examples include firmware that causes abnormal servo operation, excessive motor loads, overheating, incorrect power control, or damage to electronic components.

Firmware modification alone does not automatically exclude unrelated manufacturing defects from warranty coverage.

3.3 Firmware Recovery and Technical Assistance

Where technically feasible, Qadir Corporation may offer firmware recovery, troubleshooting, or reprogramming assistance.

Services required because of customer modifications may be subject to service fees. Any applicable charges will be communicated for customer approval before paid work begins.

Availability of original firmware files, recovery tools, or programming resources depends on the product version and the resources officially made available by Qadir Corporation.

3.4 Software and Firmware Licensing

Firmware, software, sample programs, documentation, and other digital resources supplied with EDU Mini DIY remain subject to their applicable intellectual property rights and license terms.

Customers may use and modify these resources to the extent permitted by the relevant license.

Permission to modify firmware does not automatically grant permission to commercially redistribute proprietary software or other protected materials.

4. Limited Product Warranty

4.1 Warranty Period

Qadir Corporation provides a 12-month limited warranty for new EDU Mini DIY kits purchased through QADIR Store or other authorized sales channels, unless otherwise stated in the applicable sales agreement.

The warranty period begins on the date the product is delivered to the customer.

Proof of purchase or other reasonable purchase verification may be required when requesting warranty service.

4.2 Warranty Coverage

The limited warranty covers defects in materials, manufacturing, and original supplied components arising under normal and intended use.

Subject to inspection and diagnosis, covered components may include:

  • Main control board and original electronic modules.

  • Original servo motors and associated drive components.

  • Supplied mechanical and structural components.

  • Original wiring, connectors, and electrical assemblies.

  • Supplied rechargeable battery, where included, for verified manufacturing defects.

Warranty eligibility is determined by the nature and cause of the reported defect.

4.3 Exclusions from Complimentary Warranty Service

Complimentary warranty service generally does not cover damage or malfunction directly caused by:

  • Incorrect assembly, wiring, installation, or operation.

  • Accidental drops, collisions, crushing, liquid exposure, or other external damage.

  • Overloading, mechanical obstruction, or operation outside documented specifications.

  • Unauthorized electrical alterations or incompatible power supplies.

  • Customer-developed software or modified firmware that causes the reported failure.

  • Improper charging, storage, handling, or use of batteries.

  • Normal wear of consumable or moving components.

  • Normal battery capacity reduction resulting from aging and usage.

Qadir Corporation will assess the relationship between the reported failure and the relevant circumstances. Unrelated manufacturing defects remain eligible for applicable warranty coverage.

4.4 Warranty Remedies

For a defect covered by the limited warranty, Qadir Corporation will arrange an appropriate remedy based on the nature of the issue and applicable legal obligations.

Depending on the circumstances, this may include technical guidance, repair, replacement of a defective component, or other appropriate resolution.

Warranty repairs may use inspected and qualified service parts that meet the required functional and safety standards.

If a refurbished complete unit is proposed as a replacement, Qadir Corporation will disclose its condition and obtain the customer's agreement in advance.

4.5 Warranty Period After Repair or Replacement

Complimentary warranty repairs and replacement components generally remain covered for the unused portion of the original product warranty period.

Such service does not automatically restart a new 12-month warranty period, except where applicable law or a separate written agreement requires otherwise.

5. Replacement Parts and Repair Services

5.1 Individual Replacement Parts

Qadir Corporation offers separately available replacement parts for EDU Mini DIY, subject to inventory and product compatibility.

Customers may contact customer service to identify suitable components using their product model, version, and relevant part information.

5.2 Warranty for Newly Purchased Parts

New replacement parts purchased separately from Qadir Corporation carry their own 12-month limited warranty, beginning on the date the parts are delivered, unless otherwise stated in the applicable sales terms.

This separate warranty applies to verified defects in the purchased parts and does not cover damage caused by incorrect installation, misuse, or incompatible modifications.

5.3 Paid Repair Services

For damage or malfunctions outside complimentary warranty coverage, Qadir Corporation may provide paid repair, replacement, or technical services where feasible.

Customers will receive an explanation of the proposed work and applicable charges before paid services proceed.

No paid repair will be performed without the customer's authorization.

5.4 Product Discontinuation and Parts Availability

Replacement-part availability may change as products, components, and manufacturing processes evolve.

Where a required component is no longer available, Qadir Corporation will review feasible repair or replacement options.

For eligible existing customers, Qadir Corporation may also offer a preferential purchase arrangement for a new product. Such an offer is optional, subject to availability and individual quotation, and does not require surrendering the original robot.

Existing warranty obligations and statutory remedies remain applicable.

6. STL File Support for 3D-Printable Parts

6.1 Availability of STL Files

For selected small structural or mechanical components suitable for 3D printing, Qadir Corporation may provide STL files free of charge to support educational use and customer self-repair.

STL file availability depends on the specific component, product version, and technical suitability for customer printing.

This support is not restricted to the original 12-month product warranty period.

6.2 Request Procedure

STL files are provided upon request through Qadir Corporation's customer service.

Customers may be asked to provide the product model, hardware version, component identification, photographs, or other reasonable information to confirm compatibility.

STL files are not necessarily available as unrestricted public downloads.

Qadir Corporation does not undertake to provide original editable CAD design files, including STEP or STP formats, under this STL support program.

6.3 Permitted Use

STL files provided through this program may be used for personal educational activities, research, and self-repair of the customer's EDU Mini product.

Commercial manufacturing, resale, redistribution, publication, or sublicensing of these files or parts manufactured from them requires prior written permission from Qadir Corporation, unless otherwise permitted by applicable law or a separate license.

6.4 Customer-Printed Components

The strength, dimensions, durability, and suitability of 3D-printed components may vary depending on printing materials, equipment, settings, and post-processing.

Customers are responsible for evaluating the suitability of independently manufactured parts before installation and operation.

Damage directly caused by defective customer-printed components or improper installation is not covered by complimentary warranty service.

7. Returns, Exchanges, and RMA Procedure

7.1 General Returns Policy

Purchases of EDU Mini DIY are subject to the QADIR Store Shopping, Returns & Warranty Policy and applicable consumer protection laws.

For qualifying distance sales to consumers in Taiwan, the statutory seven-day withdrawal period applies unless a legally recognized exception is applicable and properly disclosed.

The seven-day withdrawal right is separate from the 12-month limited product warranty.

7.2 Opened and Assembled Kits

Customers may conduct inspections reasonably necessary to determine the nature, characteristics, and functionality of the purchased product.

Opening the package or beginning assembly does not automatically eliminate a statutory withdrawal right.

Where handling or assembly exceeds what is reasonably necessary and results in a legally relevant reduction in product value, Qadir Corporation will assess the circumstances in accordance with applicable law.

7.3 RMA Request

Customers requesting a return, exchange, repair, or warranty service should contact Qadir Corporation's customer service and provide the relevant order information and a description of the issue.

Once the request has been registered, Qadir Corporation will issue a Return Merchandise Authorization (RMA) number, where applicable.

The RMA reference format is:

RMA-[Sales Order Number]-[Date]

Customers should include the assigned RMA number in subsequent correspondence and on the return shipment documentation.

7.4 RMA Confirmation and Return Processing

An RMA number confirms that the service request has been registered for processing. It does not, by itself, confirm eligibility for a refund, exchange, or complimentary repair.

Qadir Corporation will provide applicable return instructions, including the destination, required items, and any necessary packaging precautions.

For administrative efficiency, customers should obtain an RMA number before sending a product to Qadir Corporation.

A statutory withdrawal notice or other legally valid claim remains effective according to applicable law even if an RMA number has not yet been issued. The RMA process is intended to facilitate handling and tracking, not to restrict statutory rights.

7.5 Return Inspection and Resolution

Upon receipt of a returned product, Qadir Corporation will inspect the item as appropriate and communicate the next steps.

Refunds, exchanges, repairs, and associated shipping costs will be handled according to the applicable general policy, the circumstances of the case, and mandatory legal requirements.

8. Battery and Operational Safety

8.1 Battery Safety

Customers should use compatible batteries and charging equipment in accordance with the product instructions.

Batteries should not be punctured, crushed, short-circuited, exposed to excessive heat, or charged using unsuitable equipment.

Operation or charging should be stopped if a battery exhibits abnormal swelling, leakage, overheating, or other signs of damage.

8.2 Mechanical Safety

Before operation, customers should confirm that mechanical joints, fasteners, wiring, and moving components are properly installed.

Hands, hair, clothing, and loose objects should be kept clear of moving joints and servo-driven mechanisms.

Customers should avoid operating the robot near stairs, elevated edges, traffic, or other hazardous areas without suitable precautions.

8.3 Educational Supervision

EDU Mini DIY contains electrical components, small parts, and moving mechanisms.

Appropriate adult or instructor supervision is recommended for younger users, particularly during assembly, battery handling, firmware testing, and initial operation.

9. Customer Support and Documentation

9.1 Technical Support

Qadir Corporation provides product-related customer support through its designated service channels.

Support may include assistance with identifying components, basic troubleshooting, warranty inquiries, replacement-part availability, and relevant technical documentation.

Advanced software development, custom programming, integration projects, and specialized training may require separate service arrangements.

9.2 Product Updates

Qadir Corporation may update product documentation, software resources, or technical guidance as products evolve.

Availability of updates and compatibility with earlier hardware revisions will depend on the relevant product version.

10. Final Provisions

10.1 Relationship to General Store Policy

These terms form part of the product-specific conditions for EDU Mini DIY and should be read together with the QADIR Store Shopping, Returns & Warranty Policy.

Where applicable consumer protection laws or other mandatory legal requirements provide additional rights, Qadir Corporation will honor those requirements.

10.2 Policy Revisions

Qadir Corporation may revise these terms to reflect product developments, service improvements, or legal requirements.

Revisions will be published through QADIR Store. Terms applicable to completed purchases and existing contractual rights will be handled according to the relevant agreement and applicable law.

10.3 Customer Service

Qadir Corporation (卡德爾股份有限公司)

QADIR Store: www.dec.com.tw

Email: service@qadircorp.com

Telephone: +886 2 2298 4178

For warranty inquiries, repair requests, replacement parts, or STL file assistance, please contact our customer service team.