EDU Mini Ready – Warranty & Product Terms
QADIR Store | Product-Specific Terms and Conditions
Operated by Qadir Corporation (卡德爾股份有限公司)
Website: www.dec.com.tw
Version: 1.0
1. General Provisions
1.1 Purpose and Scope
EDU Mini Ready is a semi-assembled educational quadruped robotics platform designed for robotics education, programming, hands-on learning, and experimental development.
These terms explain the product's configuration, assembly requirements, firmware development, warranty coverage, replacement parts, repair services, and technical support.
These product-specific terms supplement the QADIR Store Shopping, Returns & Warranty Policy. Customers should review both documents before purchasing.
Where these terms and the general policy address the same matter, the more specific provision will apply to the extent permitted by applicable law. Statutory consumer rights remain protected.
1.2 Educational Product Positioning
EDU Mini Ready is intended primarily for educational institutions, students, researchers, and individuals interested in robotics development.
It is not designed or certified for safety-critical operations, emergency response, industrial production, or other applications where a malfunction could create significant risks to people or property.
Customers are responsible for evaluating the product's suitability for their intended applications.
2. Product Configuration and Assembly
2.1 Semi-Assembled Configuration
EDU Mini Ready is supplied as a semi-assembled quadruped robot.
The main body is preassembled by Qadir Corporation, while customers are responsible for installing the four legs according to the supplied instructions.
EDU Mini Ready and EDU Mini DIY share the same underlying hardware specifications and performance capabilities, subject to the applicable product version.
The primary difference between the two models is the degree of assembly completed before delivery.
2.2 Customer Assembly Requirements
Customers should carefully follow the provided instructions when installing the four legs.
Particular attention should be given to:
Correct leg positioning and orientation.
Proper installation and tightening of fasteners.
Alignment of mechanical joints and servo-driven components.
Avoidance of excessive force during installation.
Verification of unobstructed joint movement before operation.
Customers should inspect the completed assembly before powering on the robot.
2.3 Factory-Assembled Components
The main body and other components assembled by Qadir Corporation are subject to the applicable manufacturing warranty.
Customers are not required to disassemble factory-assembled components as part of the standard Ready installation procedure.
Where customers choose to disassemble, modify, or replace factory-assembled components, warranty eligibility will depend on the cause of any resulting malfunction.
Such activities do not automatically invalidate coverage for unrelated manufacturing defects.
2.4 Installation-Related Damage
Damage or malfunction directly caused by incorrect leg installation, improper alignment, excessive tightening, mechanical interference, or other customer installation errors is not covered by complimentary warranty repair.
However, defects attributable to manufacturing, original components, or factory assembly remain eligible for applicable warranty coverage and statutory remedies.
The required installation of the four legs does not, by itself, affect the product's warranty.
3. Programming and Firmware Development
3.1 Educational Programming
EDU Mini Ready supports educational programming and robotics development within the capabilities of its hardware and supported software environment.
Customers may develop their own control programs, adjust operating parameters, and conduct educational experiments.
Compatibility with third-party applications, custom software, or development tools is not guaranteed unless expressly stated in the product documentation.
3.2 Firmware Reflashing and Modification
Customers are permitted to reflash, replace, or modify the robot's firmware at their own discretion.
However, complimentary warranty service does not cover software recovery, reprogramming, configuration restoration, or hardware damage directly resulting from customer-installed or modified firmware.
Examples include firmware that causes abnormal servo movement, excessive motor loads, overheating, improper power management, or electrical damage.
Firmware modification alone does not automatically exclude unrelated manufacturing defects from warranty coverage.
3.3 Firmware Recovery and Technical Assistance
Where technically feasible, Qadir Corporation may provide firmware recovery, troubleshooting, or reprogramming assistance.
Services required because of customer modifications may be subject to service fees.
Any applicable charges will be communicated to the customer for approval before paid work begins.
Availability of original firmware, recovery tools, and programming resources depends on the product version and officially supported resources.
3.4 Software and Firmware Licensing
Firmware, software, sample programs, documentation, and other digital resources supplied with EDU Mini Ready remain subject to their applicable intellectual property rights and license terms.
Customers may use and modify these resources to the extent permitted by the relevant license.
Permission to modify firmware does not automatically grant permission to commercially redistribute proprietary software or other protected materials.
4. Limited Product Warranty
4.1 Warranty Period
Qadir Corporation provides a 12-month limited warranty for new EDU Mini Ready products purchased through QADIR Store or other authorized sales channels, unless otherwise stated in the applicable sales agreement.
The warranty period begins on the date the product is delivered to the customer.
Proof of purchase or other reasonable purchase verification may be required when requesting warranty service.
4.2 Warranty Coverage
The limited warranty covers defects in materials, manufacturing, factory assembly, and original supplied components arising under normal and intended use.
Subject to inspection and diagnosis, covered components may include:
Main control board and original electronic modules.
Original servo motors and associated drive components.
Factory-assembled mechanical and structural components.
Supplied leg assemblies and related mechanical parts.
Original wiring, connectors, and electrical assemblies.
Supplied rechargeable battery, where included, for verified manufacturing defects.
Warranty eligibility is determined by the nature and cause of the reported defect.
4.3 Exclusions from Complimentary Warranty Service
Complimentary warranty service generally does not cover damage or malfunction directly caused by:
Incorrect leg installation or customer-performed assembly.
Unauthorized electrical alterations or incompatible power supplies.
Accidental drops, collisions, crushing, liquid exposure, or other external damage.
Overloading, mechanical obstruction, or operation outside documented specifications.
Customer-developed software or modified firmware that causes the reported failure.
Improper charging, storage, handling, or use of batteries.
Normal wear of consumable or moving components.
Normal battery capacity reduction resulting from aging and usage.
Improper modification, disassembly, or replacement of factory-assembled components that causes the reported failure.
Qadir Corporation will assess the relationship between the reported failure and the relevant circumstances.
Unrelated manufacturing defects remain eligible for applicable warranty coverage.
4.4 Warranty Remedies
For a defect covered by the limited warranty, Qadir Corporation will arrange an appropriate remedy based on the nature of the issue and applicable legal obligations.
Depending on the circumstances, this may include technical guidance, repair, replacement of a defective component, or another appropriate resolution.
Warranty repairs may use inspected and qualified service parts that meet the required functional and safety standards.
If a refurbished complete unit is proposed as a replacement, Qadir Corporation will disclose its condition and obtain the customer's agreement in advance.
4.5 Warranty Period After Repair or Replacement
Complimentary warranty repairs and replacement components generally remain covered for the unused portion of the original product warranty period.
Such service does not automatically restart a new 12-month warranty period, except where applicable law or a separate written agreement requires otherwise.
5. Replacement Parts and Repair Services
5.1 Individual Replacement Parts
Qadir Corporation offers separately available replacement parts for EDU Mini Ready, subject to inventory and product compatibility.
Customers may contact customer service to identify suitable components using their product model, hardware version, and relevant part information.
5.2 Warranty for Newly Purchased Parts
New replacement parts purchased separately from Qadir Corporation carry their own 12-month limited warranty, beginning on the date the parts are delivered, unless otherwise stated in the applicable sales terms.
This separate warranty applies to verified defects in the purchased parts and does not cover damage caused by incorrect installation, misuse, or incompatible modifications.
5.3 Paid Repair Services
For damage or malfunctions outside complimentary warranty coverage, Qadir Corporation may provide paid repair, replacement, or technical services where feasible.
Customers will receive an explanation of the proposed work and applicable charges before paid services proceed.
No paid repair will be performed without the customer's authorization.
5.4 Product Discontinuation and Parts Availability
Replacement-part availability may change as products, components, and manufacturing processes evolve.
Where a required component is no longer available, Qadir Corporation will review feasible repair or replacement options.
For eligible existing customers, Qadir Corporation may also offer a preferential purchase arrangement for a new product.
Such an offer is optional, subject to availability and individual quotation, and does not require surrendering the original robot.
Existing warranty obligations and statutory remedies remain applicable.
6. STL File Support for Selected Components
6.1 Availability
For selected small structural or mechanical components suitable for 3D printing, Qadir Corporation may provide STL files free of charge to support educational use and customer self-repair.
Availability depends on the component, product version, and technical suitability for customer printing.
This support is not restricted to the original 12-month warranty period.
6.2 Request Procedure
Customers may request available STL files through Qadir Corporation's customer service.
Product identification, hardware version, component details, or photographs may be requested to confirm compatibility.
STL files are not necessarily available as unrestricted public downloads.
Original editable CAD design files, including STEP or STP formats, are not included in this support program.
6.3 Permitted Use
Provided STL files may be used for personal educational activities, research, and self-repair of the customer's EDU Mini product.
Commercial manufacturing, resale, redistribution, publication, or sublicensing of the files or parts manufactured from them requires prior written permission from Qadir Corporation, unless otherwise permitted by applicable law or a separate license.
6.4 Customer-Printed Components
The strength, dimensional accuracy, durability, and suitability of 3D-printed parts may vary depending on printing materials, equipment, settings, and post-processing.
Customers are responsible for evaluating independently manufactured parts before installation and operation.
Damage directly caused by defective customer-printed components or improper installation is not covered by complimentary warranty service.
7. Returns, Exchanges, and RMA Procedure
7.1 General Returns Policy
Purchases of EDU Mini Ready are subject to the QADIR Store Shopping, Returns & Warranty Policy and applicable consumer protection laws.
For qualifying distance sales to consumers in Taiwan, the statutory seven-day withdrawal period applies unless a legally recognized exception is applicable and properly disclosed.
The seven-day withdrawal right is separate from the 12-month limited product warranty.
7.2 Opened and Partially Assembled Products
Customers may conduct inspections reasonably necessary to determine the nature, characteristics, and functionality of the purchased product.
Opening the package or installing the four legs does not automatically eliminate a statutory withdrawal right.
Where handling or assembly exceeds what is reasonably necessary and results in a legally relevant reduction in product value, Qadir Corporation will assess the circumstances in accordance with applicable law.
7.3 RMA Request
Customers requesting a return, exchange, repair, or warranty service should contact Qadir Corporation's customer service and provide the relevant order information and a description of the issue.
Once the request has been registered, Qadir Corporation will issue a Return Merchandise Authorization (RMA) number, where applicable.
The RMA reference format is:
RMA-[Sales Order Number]-[Date]
Customers should include the assigned RMA number in subsequent correspondence and on the return shipment documentation.
7.4 RMA Confirmation and Return Processing
An RMA number confirms that the service request has been registered for processing. It does not, by itself, confirm eligibility for a refund, exchange, or complimentary repair.
Qadir Corporation will provide applicable return instructions, including the destination, required items, and necessary packaging precautions.
For administrative efficiency, customers should obtain an RMA number before sending a product to Qadir Corporation.
A statutory withdrawal notice or other legally valid claim remains effective according to applicable law even if an RMA number has not yet been issued.
The RMA process is intended to facilitate handling and tracking, not to restrict statutory rights.
7.5 Return Inspection and Resolution
Upon receipt of a returned product, Qadir Corporation will inspect the item as appropriate and communicate the next steps.
Refunds, exchanges, repairs, and associated shipping costs will be handled according to the applicable general policy, the circumstances of the case, and mandatory legal requirements.
8. Battery and Operational Safety
8.1 Battery Safety
Customers should use compatible batteries and charging equipment in accordance with the product instructions.
Batteries should not be punctured, crushed, short-circuited, exposed to excessive heat, or charged using unsuitable equipment.
Operation or charging should be stopped if a battery exhibits abnormal swelling, leakage, overheating, or other signs of damage.
8.2 Mechanical Safety
Before operation, customers should confirm that the four legs, mechanical joints, fasteners, wiring, and moving components are properly installed.
Hands, hair, clothing, and loose objects should be kept clear of moving joints and servo-driven mechanisms.
Customers should avoid operating the robot near stairs, elevated edges, traffic, or other hazardous areas without suitable precautions.
8.3 Educational Supervision
EDU Mini Ready contains electrical components, small parts, and moving mechanisms.
Appropriate adult or instructor supervision is recommended for younger users, particularly during leg installation, battery handling, firmware testing, and initial operation.
9. Customer Support and Documentation
9.1 Technical Support
Qadir Corporation provides product-related customer support through its designated service channels.
Support may include assistance with leg installation, identifying components, basic troubleshooting, warranty inquiries, replacement-part availability, and relevant technical documentation.
Advanced software development, custom programming, integration projects, and specialized training may require separate service arrangements.
9.2 Product Updates
Qadir Corporation may update product documentation, software resources, or technical guidance as products evolve.
Availability of updates and compatibility with earlier hardware revisions will depend on the relevant product version.
10. Final Provisions
10.1 Relationship to General Store Policy
These terms form part of the product-specific conditions for EDU Mini Ready and should be read together with the QADIR Store Shopping, Returns & Warranty Policy.
Where applicable consumer protection laws or other mandatory legal requirements provide additional rights, Qadir Corporation will honor those requirements.
10.2 Policy Revisions
Qadir Corporation may revise these terms to reflect product developments, service improvements, or legal requirements.
Revisions will be published through QADIR Store.
Terms applicable to completed purchases and existing contractual rights will be handled according to the relevant agreement and applicable law.
10.3 Customer Service
Qadir Corporation (卡德爾股份有限公司)
QADIR Store: www.dec.com.tw
Email: service@qadircorp.com
Telephone: +886 2 2298 4178
For warranty inquiries, repair requests, replacement parts, or STL file assistance, please contact our customer service team.