Skip to Content

P105 V6 – Warranty & Product Terms

QADIR Store | Product-Specific Terms and Conditions

Operated by Qadir Corporation (卡德爾股份有限公司)

Website: www.dec.com.tw

Version: 1.0

1. General Provisions

1.1 Purpose and Scope

P105 V6 is a compact quadruped robotic platform developed by Qadir Corporation for robotics research, technical development, demonstrations, inspection applications, and system integration.

These terms establish the conditions governing product delivery, operation, software and firmware use, warranty coverage, maintenance, replacement parts, repairs, and technical support.

These product-specific terms supplement the QADIR Store Shopping, Returns & Warranty Policy.

Customers should review both documents before purchasing or operating the product.

Where these terms and the general policy address the same matter, the more specific provision will apply to the extent permitted by applicable law. Mandatory statutory rights remain protected.

1.2 Product Positioning

P105 V6 is a quadruped robotics platform intended for operation within its published technical specifications.

Depending on the purchased configuration, it may be used for research, education, demonstrations, indoor inspection, remote operation, and other compatible applications.

The product is not inherently certified for life-safety, emergency response, hazardous-area operation, or other safety-critical applications.

Any application requiring special safety certification, environmental protection, communications infrastructure, or third-party integration must be separately evaluated.

2. Product Configuration and Delivery

2.1 Standard Product Configuration

P105 V6 is supplied in the configuration specified in the applicable product description, quotation, or order confirmation.

The delivered configuration may include the robot body, control electronics, actuators, battery, supported communication interfaces, operating software, and designated accessories.

Optional equipment, external network infrastructure, additional sensors, custom software, and third-party integrations are included only when expressly specified in the applicable order.

2.2 Product Inspection Upon Delivery

Customers should inspect the delivered product and accessories for visible shipping damage, missing items, or other apparent irregularities.

Any such issues should be reported to Qadir Corporation as soon as reasonably possible, together with relevant photographs and order information.

Failure to report an apparent issue immediately does not automatically waive statutory remedies or warranty rights.

2.3 Initial Operation

Before initial operation, customers should review the supplied operating instructions and verify that the battery, mechanical assemblies, communication interfaces, and control systems are correctly prepared.

The robot should initially be tested in a controlled environment with adequate clearance and appropriate supervision.

Customers should not operate the product beyond its published operating limits.

3. Operation and Application Conditions

3.1 Intended Operation

P105 V6 should be operated in accordance with its documented technical specifications and operating instructions.

Customers should consider terrain conditions, obstacles, operating speed, payload distribution, battery condition, wireless signal quality, and surrounding personnel before operation.

3.2 Payload and Mechanical Loading

Payloads must remain within the limits specified for the applicable P105 V6 configuration.

Payload weight, mounting position, center of gravity, and dynamic loading may affect stability, mobility, operating time, and mechanical durability.

Damage directly caused by excessive loading, improper payload installation, or operation outside documented specifications is not covered by complimentary warranty service.

3.3 Environmental Conditions

Customers should avoid exposing the robot to rain, standing water, excessive moisture, corrosive substances, extreme temperatures, or other unsuitable environments unless the purchased configuration is expressly rated for those conditions.

The product's suitability for outdoor operation or demanding industrial environments must be determined from its actual technical specifications and any separately agreed protective equipment.

No environmental protection rating should be assumed unless expressly documented.

3.4 Inspection and Security Applications

P105 V6 may be incorporated into inspection, monitoring, or security-related applications where technically appropriate.

However, the standard product does not guarantee continuous surveillance, uninterrupted communications, autonomous threat detection, or successful detection of every event.

Customers remain responsible for establishing suitable operational procedures, network infrastructure, supervision, and any required backup systems.

4. Software, Firmware, and System Integration

4.1 Standard Software and Firmware

P105 V6 may be supplied with firmware, operating software, control interfaces, or development resources appropriate to the purchased configuration.

Software functions and compatibility are determined by the product version and officially supported documentation.

Qadir Corporation may provide applicable software updates, technical guidance, or configuration support through its designated service channels.

4.2 Customer Software Development

Customers may develop applications or integrations using interfaces and development resources made available for their product configuration, subject to applicable licensing terms.

Custom software, third-party applications, and customer-developed control systems are not automatically covered by standard product support.

Compatibility, performance, and functionality of independently developed software are the customer's responsibility unless otherwise agreed in writing.

4.3 Firmware Modification and Reinstallation

Customers may reinstall or modify firmware where supported by the applicable product configuration and licensing terms.

However, complimentary warranty service does not cover software restoration, reconfiguration, or hardware damage directly resulting from customer-installed or modified firmware.

Examples include modifications that cause excessive actuator loading, abnormal movement, overheating, electrical damage, or unsafe operating behavior.

Firmware modification alone does not automatically invalidate warranty coverage for unrelated manufacturing defects.

4.4 Third-Party Hardware Integration

Customers may wish to integrate cameras, sensors, communication devices, computers, network equipment, or other external systems.

Such integrations must remain within the product's mechanical, electrical, and software interface specifications.

Damage directly caused by incompatible equipment, incorrect wiring, improper installation, or excessive electrical or mechanical loading is not covered by complimentary warranty service.

Unrelated original manufacturing defects remain eligible for applicable warranty coverage.

4.5 Wireless Communications and Remote Operation

Wireless communication performance depends on factors including network equipment, frequency selection, antenna configuration, interference, obstacles, installation conditions, and operating environment.

Unless expressly specified in a separate written agreement, Qadir Corporation does not guarantee a particular wireless communication distance, data throughput, video transmission performance, or uninterrupted connection.

Customers are responsible for providing and maintaining suitable external network infrastructure when required.

Remote operation should include appropriate precautions for connection loss, communication delays, and unexpected interruptions.

4.6 Software and Intellectual Property

Firmware, software, documentation, control interfaces, and other technical resources remain subject to their applicable intellectual property rights and license terms.

Purchase of P105 V6 does not automatically transfer ownership of proprietary source code, engineering designs, or other protected intellectual property.

Commercial redistribution or sublicensing requires authorization unless otherwise permitted under the applicable license or law.

5. Limited Product Warranty

5.1 Warranty Period

Qadir Corporation provides a 12-month limited warranty for new P105 V6 products purchased through QADIR Store or other authorized sales channels, unless otherwise stated in the applicable sales agreement.

The warranty period begins on the date the product is delivered to the customer.

Proof of purchase or other reasonable purchase verification may be required when requesting warranty service.

5.2 Warranty Coverage

The limited warranty covers verified defects in materials, manufacturing, and original supplied components arising under normal and intended use.

Subject to inspection and diagnosis, covered components may include:

  • Main control boards and original electronic modules.

  • Original servo motors, actuators, and associated drive components.

  • Factory-assembled mechanical and structural components.

  • Original wiring, connectors, and electrical assemblies.

  • Factory-installed communication hardware.

  • Supplied rechargeable battery, where included, for verified manufacturing defects.

Warranty eligibility is determined by the nature and cause of the reported defect.

5.3 Exclusions from Complimentary Warranty Service

Complimentary warranty service generally does not cover damage or malfunction directly caused by:

  • Accidental drops, collisions, crushing, or external impact.

  • Overloading, mechanical obstruction, or operation outside documented specifications.

  • Improper handling, storage, transportation, or maintenance.

  • Water ingress, corrosion, excessive moisture, or exposure to unsuitable environments.

  • Unauthorized electrical alterations or incompatible power supplies.

  • Incorrect installation of third-party equipment or accessories.

  • Customer-developed software or modified firmware that causes the reported failure.

  • Improper battery charging, handling, or storage.

  • Normal wear of moving components and consumable parts.

  • Normal battery capacity reduction due to aging and usage.

Qadir Corporation will assess the relationship between the reported failure and the relevant circumstances.

Customer modification or integration alone does not automatically exclude unrelated manufacturing defects from warranty coverage.

5.4 Warranty Remedies

For defects covered by the limited warranty, Qadir Corporation will arrange an appropriate remedy based on the nature of the issue and applicable legal obligations.

Depending on the circumstances, this may include technical guidance, repair, replacement of a defective component, or another appropriate resolution.

Warranty repairs may use inspected and qualified service parts meeting the required functional and safety standards.

If a refurbished complete unit is proposed as a replacement, Qadir Corporation will disclose its condition and obtain the customer's agreement in advance.

5.5 Warranty Period After Repair or Replacement

Complimentary warranty repairs and replacement components generally remain covered for the unused portion of the original product warranty period.

Such service does not automatically restart a new 12-month warranty period, except where applicable law or a separate written agreement requires otherwise.

6. Replacement Parts and Maintenance Services

6.1 Replacement Parts

Qadir Corporation may provide replacement components for P105 V6, subject to inventory, product version, and compatibility.

Customers should provide the product model, relevant version information, and a description of the required component when requesting parts.

6.2 Warranty for Newly Purchased Parts

New replacement parts purchased separately from Qadir Corporation carry their own 12-month limited warranty, beginning on the date the parts are delivered, unless otherwise stated in the applicable sales terms.

This warranty covers verified defects in the purchased parts under normal and intended use.

Damage caused by incorrect installation, incompatible modifications, or misuse is not covered by complimentary warranty service.

6.3 Paid Repairs

For damage or malfunctions outside complimentary warranty coverage, Qadir Corporation may offer paid repair or replacement services where technically feasible.

Customers will receive an explanation of the proposed work and applicable charges before paid services proceed.

No paid repair will be performed without the customer's authorization.

6.4 Preventive Maintenance

Customers should regularly inspect the robot's mechanical joints, fasteners, actuators, wiring, battery, and other relevant components.

Routine inspection, cleaning, adjustments, and preventive maintenance are generally the customer's responsibility unless a separate maintenance agreement provides otherwise.

6.5 On-Site Technical Services

On-site inspection, installation, maintenance, system integration, or troubleshooting is not automatically included in the standard product warranty.

Where available, such services may be provided under a separate quotation or service agreement.

This provision does not limit remedies that Qadir Corporation is legally required to provide.

6.6 Product Discontinuation and Parts Availability

Replacement-part availability may change as products and manufacturing processes evolve.

Where a required component is no longer available, Qadir Corporation will review feasible repair or replacement options.

For eligible existing customers, Qadir Corporation may offer a preferential purchase arrangement for a new product.

Such an offer is optional, subject to availability and individual quotation, and does not require surrendering the original robot.

Existing warranty obligations and statutory remedies remain applicable.

7. Returns, Exchanges, and RMA Procedure

7.1 General Returns Policy

Purchases of P105 V6 are subject to the QADIR Store Shopping, Returns & Warranty Policy and applicable consumer protection laws.

For qualifying distance sales to consumers in Taiwan, the statutory seven-day withdrawal period applies unless a legally recognized exception is applicable and properly disclosed.

The seven-day withdrawal right is separate from the 12-month limited product warranty.

7.2 Product Inspection and Handling

Customers may conduct inspections reasonably necessary to determine the nature, characteristics, and functionality of the purchased product.

Opening the package or conducting reasonable initial inspection does not automatically eliminate a statutory withdrawal right.

Where handling or use exceeds what is reasonably necessary and results in a legally relevant reduction in product value, Qadir Corporation will assess the circumstances in accordance with applicable law.

7.3 RMA Request

Customers requesting a return, exchange, repair, or warranty service should contact Qadir Corporation's customer service and provide the relevant order information and a description of the issue.

Once the request has been registered, Qadir Corporation will issue a Return Merchandise Authorization (RMA) number, where applicable.

The RMA reference format is:

RMA-[Sales Order Number]-[Date]

Customers should include the assigned RMA number in subsequent correspondence and on the return shipment documentation.

7.4 RMA Confirmation and Return Processing

An RMA number confirms that the service request has been registered for processing.

It does not, by itself, confirm eligibility for a refund, exchange, or complimentary repair.

Qadir Corporation will provide applicable return instructions, including the destination, required items, and necessary packaging precautions.

For administrative efficiency, customers should obtain an RMA number before sending a product to Qadir Corporation.

A statutory withdrawal notice or other legally valid claim remains effective according to applicable law even if an RMA number has not yet been issued.

The RMA process facilitates handling and tracking and does not restrict statutory rights.

7.5 Return Inspection and Resolution

Upon receipt of a returned product, Qadir Corporation will inspect the item as appropriate and communicate the next steps.

Refunds, exchanges, repairs, and associated shipping costs will be handled according to the applicable general policy, the circumstances of the case, and mandatory legal requirements.

8. Operational Safety

8.1 General Safety

P105 V6 contains powered actuators, moving joints, electrical components, and a rechargeable battery.

Customers should operate the robot in an appropriate environment and maintain adequate clearance from people, animals, and surrounding objects.

Hands, hair, clothing, and loose objects should be kept clear of moving mechanisms.

8.2 Remote Control and Communication Loss

Remote operators should maintain appropriate situational awareness and follow the supplied operating procedures.

Customers should verify the product's applicable connection-loss behavior before operating it in environments where communication interruptions may create risks.

Customers should not assume that every configuration includes the same automatic recovery, stopping, or autonomous return functions.

8.3 Battery Safety

Customers should use compatible batteries and charging equipment in accordance with the product instructions.

Batteries should not be punctured, crushed, short-circuited, exposed to excessive heat, or charged using unsuitable equipment.

Operation or charging should stop if a battery exhibits abnormal swelling, leakage, overheating, or other signs of damage.

8.4 Operational Supervision

Customers are responsible for selecting suitable operating areas, establishing appropriate safety precautions, and ensuring that operators understand the product's limitations.

Applications involving public access, security monitoring, third-party equipment, or elevated operational risk may require additional safeguards.

9. Technical Support and Custom Integration

9.1 Standard Technical Support

Qadir Corporation provides product-related customer support through its designated service channels.

Support may include basic troubleshooting, warranty inquiries, replacement-part identification, relevant operating guidance, and product documentation.

9.2 Custom Development and Integration

Custom software development, third-party equipment integration, advanced autonomy, network deployment, security-system integration, and other specialized engineering services are not included in the standard product warranty unless expressly agreed in writing.

Such services may be provided under separate quotations, project agreements, or maintenance contracts.

9.3 Technical Updates

Qadir Corporation may update product documentation, software resources, or technical guidance as products evolve.

Availability of updates and compatibility with earlier hardware or software versions depend on the applicable product configuration.

10. Final Provisions

10.1 Relationship to General Store Policy

These terms form part of the product-specific conditions for P105 V6 and should be read together with the QADIR Store Shopping, Returns & Warranty Policy.

Where applicable consumer protection laws or other mandatory legal requirements provide additional rights, Qadir Corporation will honor those requirements.

10.2 Policy Revisions

Qadir Corporation may revise these terms to reflect product developments, service improvements, or legal requirements.

Revisions will be published through QADIR Store.

Terms applicable to completed purchases and existing contractual rights will be handled according to the relevant agreement and applicable law.

10.3 Customer Service

Qadir Corporation (卡德爾股份有限公司)

QADIR Store: www.dec.com.tw

Email: service@qadircorp.com

Telephone: +886 2 2298 4178

For warranty inquiries, repair requests, replacement parts, or technical support, please contact our customer service team.